Each sync keeps what the printer reported, slot by slot (material, colour,
empty, tagged — nothing that identifies a spool). The card's drawing colours
in the first AMS unit's spools, dashes empty slots, and lists every slot and
the external holder underneath with its colour name. "Test & sync" redraws
the card with what it just read.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Printers move out of Settings into their own table and page: each has an
optional nickname (the model is shown when blank), a model from the Bambu
lineup with a line drawing that follows the selection, an AMS type
suggested from the model, and its address, serial and access code. Access
codes are never returned to the browser. The printer set up in Settings is
migrated automatically and its settings rows removed.
Background sync covers every printer. Grams left are filled in only from an
AMS that measures (AMS, AMS 2 Pro, AMS HT), never from an AMS lite.
Spools now show their RFID tag ID, product code and filament code, and say
which printer they're loaded in.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every Bambu spool reports an RFID identity — a spool id and a tag id, both
unique — so a printer's report can now keep the Filament page in step: a new
tagged spool is created, named and coded from the bundled filament list; one
already known is moved to its current slot; one you added by hand before the
printer was connected is adopted rather than duplicated; and one the printer no
longer reports is marked as taken out. It runs on "Save & test connection" and
every ten minutes in the background, still only reading from the printer.
Untagged spools are listed, not stored: without a tag, one spool of a colour is
indistinguishable from the next, so guessing would mean duplicates.
The planning is a pure function, tested against the cases that would cause
duplicates. The database side was exercised separately against a real
Postgres: three successive reports created, moved and unloaded spools as
intended, and a deliberate duplicate was refused by the partial unique index.
The amount left isn't taken from the printer yet: an AMS lite only reports full
or empty, so it's left blank until printers can say which kind of AMS they have.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adding a spool no longer means typing a hex code: choose "PLA Basic — Jade
White (10100)" and the material, colour name, swatch and filament code fill
themselves. Slot colours on the model page are named where they match, so a
slot reads "#586579 · Basic Blue Gray" instead of bare hex.
The filament code is stored per spool. It isn't decoration — the AMS reports
filament IDs, so this is what a later read-only printer connection will match a
loaded tray against.
db/bambu-filaments.json holds Bambu Lab's 325 filaments (material, type, colour
name, code, colours), included by kind permission of 3dfilamentprofiles.com,
whose terms otherwise reserve the data. The permission and source are recorded
in the file itself as well as the README, so nobody reuses it by accident.
Naming uses a much tighter threshold than matching (12 against 50): identifying
a colour and substituting for one are different questions.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A Bambu Studio or OrcaSlicer 3MF names the filaments its plates use, but
reading that means shelling out to Python, so it can't be done per page load.
A background pass — in the same loop as thumbnails and fingerprints — reads it
once per model into models.filaments, which turns "what can I print now" into
a comparison of two lists.
Adds a Filament page for the spools on hand: material, colour, brand and grams
left, edited in place. Matching is on material only; a project's exact colours
would make almost nothing printable, and a different colour still prints.
Measured on the dev library: 10 models read with no errors, the two Bambu
projects resolving to four PLA colours each, and no plate images written
because the reader skips --images and queues behind anything interactive.
Not done yet: nothing in the library view uses this — no "printable now" badge
or filter — and the Filament page itself has not been seen rendered, because
the local preview browser has no session.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Checks have imported metadata only since MakerWorld refused bulk downloads.
Today's measurement changed that picture: it refuses bursts a few seconds
apart, but 67 models downloaded in a row about 20 seconds apart without one
refusal. So downloading during a check is viable — at the right pace.
Per watch, off by default: "Files: on/off" on the row, a checkbox when adding
one. With it on, a check spaces downloads 20 seconds apart instead of 3, and
stops after two refusals in a row, coming back shortly rather than collecting
refusals for the whole batch. A model whose files were refused still lands as
'partial', so "Get files" can finish it later.
Auto-imports now get the same AI treatment a manual run does — tags, a clearer
name where the site's is boilerplate, and collections to review — rather than
tags alone.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
MakerWorld allows an account only a couple of downloads in a row, so a check
that tried to fetch files left most models empty. A check now imports each
model's page — name, description, picture, licence — and marks it 'partial';
"Get files" pulls the files for the ones you actually want to print.
Verified against a public collection: 11 models imported with descriptions and
thumbnails, no files fetched, no MakerWorld token needed for the check.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A watch reads the collection page through FlareSolverr carrying your token, so
private collections work, and imports the models it hasn't seen into a Printhive
collection of the same name (optionally AI-tagging them). Checks run on your
chosen interval, a few models at a time with pauses between, and each design is
remembered so nothing is imported twice. A refused token stops the check and the
Watched page offers to update it; models removed on MakerWorld stay here.
The import endpoint's work moved into importFromUrl() so watches reuse it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Runs can now do any mix of: tags & descriptions, clearer names, and
collection suggestions. A run without tags doesn't mark models as tagged.
- Collection ideas reuse your collections and earlier ideas where they fit and
wait on the AI page, grouped by name, until you create/add or dismiss them.
Dismissed ideas aren't suggested for that model again; spelling variants
group together under the capitalised spelling.
- A reply that isn't the JSON asked for is asked again once; both requests
count towards the run's tokens and cost.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A run option asks the AI for a clearer name only when the current one is messy
(file-name leftovers, typos, site boilerplate). The previous name is kept, the
run feed shows what was renamed, and the model page offers Undo. Giving a model
a name yourself clears the undo.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- AI tagging through any OpenAI-compatible API: DeepSeek by default, or
OpenRouter, OpenAI, or a local server (Ollama, LM Studio). Settings → AI
with presets, prices and "Save & test connection"; the key never leaves
the server except to the provider.
- Runs over untagged models, all models, or one model from its page: live
progress, tokens and cost, stop/resume (retrying failures), an optional
spending limit, and paused rather than resumed after a restart. Adapts to
models without JSON mode or image input; stops on a rejected key or no
credit. Tags are only added; descriptions filled only where empty unless
asked.
- Search by meaning: local bge-small-en-v1.5 embeddings (transformers.js),
indexed in the background whenever a model's text changes; Words/Meaning
switch on the search box. Stored as REAL[] in Postgres, no pgvector needed.
- Automatic tags: strict whole-word rules (part types, mechanisms, materials,
techniques) over names, file names and archive contents, plus your own
word -> tag rules; on/off (optionally removing its tags) and re-apply.
- Tags remember where they came from (user / rule / ai); edits keep that,
rule and AI passes never touch your own tags, and the model page marks them.
- Docker: ships the embedding model and only Linux onnxruntime binaries.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- The background worker now also gives models without a thumbnail one:
an embedded 3MF/plate preview, else a picture uploaded with the model,
else a 3MF preview or picture inside one of its archives, else a render
of an STL/OBJ/3MF (loose or inside an archive).
- tools/render_thumbnail.py renders without a GPU: meshes are simplified
per distinct part (the 8M-face lion project renders in ~8 s / ~200 MB),
3MF projects show their first plate in filament colours, and only
camera-facing faces are painted (inside-out meshes and mirrored parts are
re-oriented first).
- models.thumbnail_status stops retries when there's nothing to use; adding
files clears it. The browser now only renders FBX/STEP/3DM thumbnails.
- The library checks back while fingerprints or thumbnails are pending and
refreshes when they land.
- Python sidecar needs pillow and fast-simplification; compose keeps the
archive extraction cache in a volume. README covers the phase 2 features.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Archives
- ZIP, 7Z, RAR and TAR/.tar.gz uploads are indexed in the background into
archive_entries (7-Zip compiled to WASM in a worker thread; node-tar for
tar). macOS/Windows clutter and paths that could escape the extraction
folder are skipped.
- Models inside archives are extracted once per archive to hash and
geometry-fingerprint them, so duplicates are found inside packs too.
Pictures, PDFs and readmes are listed but never matched.
- New routes list an archive's entries and serve/convert a single entry,
extracted on first use and cached under extracted/.
Viewer
- Model detail lists what's inside each archive with view/download links;
opening an entry adds a viewer tab.
- New 3D formats: FBX (with sibling textures), OBJ with its MTL and
textures, STEP/STP via occt-import-js, and Rhino 3DM via rhino3dm — the
WASM readers are served from node_modules, loaded on first use.
- Pictures, PDFs and text files (jpg/png/gif/webp/bmp/svg, pdf, txt/md)
can be uploaded and preview in the viewer; a model without an embedded
3MF preview uses its first picture as the card thumbnail.
- Inline file responses send nosniff, and SVGs are sandboxed.
- GLB conversions write to a temp file and rename, so a half-written
preview is never served; a later tab can't be overdrawn by a slow load.
- Better 3MF card image: the project thumbnail or plate 1 render, not a
slicer pick map.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Fingerprint every file in the background: SHA-256 for all formats plus a
trimesh geometry fingerprint for STL/OBJ/3MF, so renamed, re-exported or
converted copies are still matched. Backfills existing files on startup.
- Duplicates view groups models that share files (exact copies vs same
shape), recommends which to keep, merges tags/collections/notes into the
kept model and trashes the rest; groups can be dismissed.
- Deleting now moves models to a restorable trash; files are only removed
from disk on permanent delete or when the trash is emptied.
- Per-model notes with autosave.
- Search across names, notes, tags, files and designers; filter by format,
source and license; include/exclude tags with any/all matching; sort and
group by source or format. Preferences persist per browser.
- Add node:test unit tests for duplicate grouping and fingerprints.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- license_rules table (name -> commercial); licenses auto-register on
import with a best-effort seed, overridable in Settings (applies the
choice to every model with that license)
- resolveCommercial() replaces ad-hoc inferCommercial across import/refresh
- GET/PUT /api/licenses; "License types" section in Settings
- Fix CC short codes: BY / BY-SA / BY-ND now classed sellable (MakerWorld
stores e.g. "BY-SA"); NC variants stay non-commercial
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- users + password_resets tables; bcrypt hashing; JWT session in an
httpOnly cookie (auth_secret auto-generated in settings)
- /api gated behind auth (except /api/config and /api/auth/*)
- First-run creates the account (no open registration after that);
login, logout, forgot/reset-password flows
- SMTP settings (host/port/secure/user/pass/from) in Settings menu;
nodemailer sends reset links
- Auth screen (sign in / create account / forgot / reset) gates the SPA;
Sign out button; COOKIE_SECURE=true in compose for HTTPS
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
